Operating instructions

Commissioning

4.7 Data backup with the operator panel and memory card

CU240S and CU240E Control Units, FW 3.2

Operating Instructions, 03/2009, A5E02440075B AA

Transferring the parameters from the MMC memory card into the inverter (download)

Table 4- 16 Transferring data from the memory card to the inverter

Parameters Description

P0003 = 3 3: Expert

P0010 = 30 30: Initiating parameter transfer

P0803 = 2 2: Transfer data to the EEPROM (of the inverter) from the MMC. "RDY" LED flashes.

• If the upload procedure is successful, P0010 and P0803 are set to 0 and the "RDY"

LED lights up.

• If the download procedure is unsuccessful, F0061 or F0062 is displayed and the

LED "SF" (red) lights up. In this case, make another attempt to transfer data.