Operating instructions

Commissioning
4.6 Commissioning with the operator panel
CU240S and CU240E Control Units, FW 3.2
Operating Instructions, 03/2009, A5E02440075B AA
71
4.6 Commissioning with the operator panel
4.6.1 Function of the Basic Operator Panel
The Basic Operator Panel (BOP) offers various commissioning options and ways tosave
data and transfer data with the BOP (Page 77).
The Basic Operator Panel can be used to commission drives, monitor operation and set
individual parameters. The keys can be used, for example, to set control signals and the
speed setpoint. Parameter changes that are made using the BOP are saved so that they are
protected against power failure.
The Basic Operator Panel for 'local' operation and how to attach it to the Control Unit
How to attach the BOP to the Control Unit.
The Basic Operator Panel is an input and display instrument that allows you to operate
inverters "locally". A BOP can be used for more than one inverter and is mounted directly on
a Control Unit.
The BOP has 8 keys and a 2-line screen for displaying values and units:
● Line 1 shows a parameter number or value
● Line 2 shows the corresponding physical unit