Operating instructions

Description
2.3 Overview of Power Modules
CU240S and CU240E Control Units, FW 3.2
24 Operating Instructions, 03/2009, A5E02440075B AA
2.3 Overview of Power Modules
Figure 2-2 Power Module versions
A number of Power Module versions are available for different line supply voltages in a
power range from between 0.37 kW and 250 kW. Depending on the Power Module used, the
energy released in regenerative mode is either
● fed back to the supply system (Efficient Infeed Technology) or
● stored in the DC link and/or fed to an external braking resistor.
Overview of the available Power Modules
Depending on the output, Power Modules are available with different frame sizes The range
of frame sizes extends from FSA to FSGX.
FSA FSB FSC FSD FSE FSF FSGX
0.37 kW …
1.5 kW
2.2 kW …
4kW
7.5 kW …
15 kW
18.5 kW …
30 kW
37 kW …
45 kW
55 kW …
132 kW
160 kW …
250 kW
With integr. Line
filter, class A
○ ● ● ● ● ◑
1)
◑
2)
PM240
3-ph. 400V
AC
With integr.
Braking chopper
● ● ● ● ● ● ◑
2)
7.5 kW …
15 kW
18.5 kW- 3
0 kW
37 kW …
45 kW
55 kW …
90 kW
With integr. Line
filter, class A
● ● ● ●
PM250
3-ph. 400V
AC
Capable of
energy recovery
- -
● ● ● ●
-
11 kW …
18.5 kW
30 kW …
55 kW
With/without
integr. Line filter,
Class A
● ●
With integr.
Sine-wave filter
● ●
PM260
3-ph. 690V
AC
Capable of
energy recovery
- - -
●
-
●
-
● = Feature available; ○ = Feature not available; ◑ = Feature available, modified;
1) PM240 Power Modules, 110 kW and higher, are only available without an integrated class A filter. Instead, an optional
class A line filter for side mounting is available.
2) PM240 FSGX Power Module is only available without integrated components. Instead, optional line reactor, line filter,
output reactor, sine-wave filter, braking chopper, braking resistor and Brake Relay are available.