Operating instructions

Functions

5.11 Operation in fieldbus systems

CU240S and CU240E Control Units, FW 3.2

174 Operating Instructions, 03/2009, A5E02440075B AA

Integrating the inverter into a higher-level SIMATIC control

All settings required for integrating the inverter in the SIMATIC controller are carried out in

STEP 7 with HW Config.

Creating the STEP 7 project and configuring SIMATIC 300

The procedure here is very similar to that described for PROFIBUS. The main differences

are:

1. In the module catalog, choose a PROFINET-capable S7 controller (e.g. CPU 315-2

PN/DP).

2. Once you have added the SIMATIC 300, create a PROFINET network.

Figure 5-31 Add SIMATIC 300 station with the PROFINET network

352),1(7