Installation manual

5 Download
16
SINAMICS G120 (CU240S DP) Control via PROFIBUS
V1.0, Beitrags-ID: 45288241
Copyright © Siemens AG 2010 All rights reserved
5.2 SINAMICS G120 configuration
When this has been completed, download the SINAMICS G120 configuration using
the STARTER parameterizing tool.
• Starting from the main path of the SIMATIC Manager, start the STARTER
parameterizing software by selecting the SINAMICS_G120 icon and double
click on the Inbetriebnahme icon.
• Then, in the Project Navigator of the STARTER parameterizing software select
the object "G120" (1.) and press the button
(2.) to establish the online
connection to the drive inverter.
• After you have established the online connection, press the button
to
download the SINAMICS G120 drive parameters.
• Follow the instructions on the screen and acknowledge the prompt "After
loading, copy RAM to ROM".