Installation manual

5 Download

SINAMICS G120 (CU240S DP) Control via PROFIBUS

V1.0, Beitrags-ID: 45288241

5 Download

5.1 S7 program

To download the S7 program, you will require a connection between the MPI

interface of your PG/PC and the MPI interface of the S7 CPU.

• Start the SIMATIC Manager.

• De-archive the function example supplied.

• Open the G120_STD_APP1 project.

• Select the PROFIBUS interface parameterization using Options > Select

PG/PC interface… .

• Open HW-Config and download this into the control. After the download re-

close HW-Config.

• In SIMATIC Manager, select the block folder via CPU315-2 PN/DP > S7

Program > Blocks.

• Download all of the S7 program blocks into the CPU