User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 CU240B/E-2 Control Units List Manual

100

Parameters

List of parameters

1-92

SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013

Index: [0] = Number of digital inputs

[1] = Number of digital outputs

[2] = Number of digital input/outputs bidirectional

[3] = Number of analog inputs

[4] = Number of analog outputs

Description: Displays the actual value at the digital inputs.

This means that the actual input signal can be checked at terminal DI x or DI/DO x prior to switching from the simu-

lation mode (p0795.x = 1) to terminal mode (p0795.x = 0).

Note: AI: Analog Input

DI: Digital Input

T: Terminal

Description: Displays the actual value at the digital inputs.

This means that the actual input signal can be checked at terminal DI x or DI/DO x prior to switching from the simu-

lation mode (p0795.x = 1) to terminal mode (p0795.x = 0).

Note: AI: Analog Input

DI: Digital Input

T: Terminal

r0721 CU digital inputs terminal actual value / CU DI actual value

CU240B-2

CU240B-2_DP

Access level: 2 Calculated: - Data type: Unsigned32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: 1510, 2020, 2030,

2031, 2100, 2120, 2130, 2131, 2132,

2133

Min Max Factory setting

- - -

Bit field: Bit Signal name 1 signal 0 signal FP

00 DI 0 (T. 5) High Low -

01 DI 1 (T. 6) High Low -

02 DI 2 (T. 7) High Low -

03 DI 3 (T. 8) High Low -

11 DI 11 (T. 3, 4) AI 0 High Low -

r0721 CU digital inputs terminal actual value / CU DI actual value

CU240E-2

CU240E-2_DP

CU240E-2_DP_F

CU240E-2_F

CU240E-2_PN_F

CU240E-2 PN