User Manual

Index
C-810
© Siemens AG 2009 - 2013 All Rights Reserved
SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013
2501
Control word, sequence control, 2-572
2503
Status word, sequence control, 2-573
2505
Control word, setpoint channel, 2-574
2510
Status word 1 (r0052), 2-575
2511
Status word 2 (r0053), 2-576
2512
Control word 1 (r0054), 2-577
2513
Control word 2 (r0055), 2-578
2520
Control word, speed controller, 2-579
2522
Status word, speed controller, 2-580
2526
Status word, closed-loop control, 2-581
2530
Status word, current control, 2-582
2534
Status word, monitoring functions 1,
2-583
2536
Status word, monitoring functions 2,
2-584
2537
Status word, monitoring functions 3,
2-585
2546
Control word, faults/alarms, 2-586
2548
Status word, faults/alarms 1 and 2, 2-587
2634
Sequence control - Missing enables,
2-588
2701
Simple brake control, 2-590
2800
Parameter manager, 2-592
2802
Monitoring functions and faults/alarms,
2-593
2804
Status words, 2-594
2810
STO, Safe Torque Off, 2-595
2812
F-DI, fail-safe digital input, 2-596
2819
SS1, Safe Stop 1, internal STOP A, B, F,
2-598
2820
SLS, Safely-Limited Speed
, 2-599
2823
SSM (Safe Speed Monitor), 2-600
2824
SDI (Safe Direction), 2-601
2840
PROFIsafe control and status word, 2-602
2850
Fail-safe digital inputs (F-DI 0 ... F-DI 2),
2-603
2855
F-DI assignment, 2-604
2858
Extended Functions via PROFIsafe
(9601.2 = 1 and 9601.3 = 1), 2-605
2915
Standard telegrams, 2-607
2917
Manufacturer-specific telegrams, 2-608
3001
Overview of setpoint channel, 2-610
3010
Fixed speed setpoints, binary selection
(p1016 = 2), 2-611
3011
Fixed speed setpoints, direct selection
(p1016 = 1), 2-612
3020
Motorized potentiometer, 2-613
3030
Main/supplementary setpoint, setpoint
scaling, jogging, 2-614
3040
Direction limitation and direction reversal,
2-615
3050
Skip frequency bands and speed limita-
tions, 2-616
3060
Basic ramp-function generator, 2-617
3070
Extended ramp-function generator, 2-618
3
080
Ramp-function generator selection, -sta-
tus word, -tracking, 2-619
6030
Speed setpoint, droop, 2-621