User Manual

Safety Integrated Basic Functions
Function diagrams
2-593
© Siemens AG 2009 - 2013 All Rights Reserved SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013
Fig. 2-60 2802 – Monitoring functions and faults/alarms
- 2802 -
Function diagram
87654321
fp_2802_97_69.vsd
Safety Integrated Basic Functions
G120 CU240E-2
12.12.2012 V4.6
Monitoring functions and faults/alarms
[2810.6] DIAG_U
[2810.6] DIAG_L
P1: F/A01600 ... 01699
P2: F/A30600 ... 30699
F01611
F30611
STOP F
[2810.3]
F01600/F30600
1
1
SI version Drv P1
r9770
SI status P1
r9772
r9772
[2804.2]
.15
SI status P1
r9772
r9772
[2804.2]
.10
Safety monitoring functions
Faults/alarms
Cross checking list
SI status P1
r9772
r9772
[2804.2]
.9
[2810.1] STO-Klemme P1 (r0722.4)
[2810.1] STO terminal P2 (r0722.5)
[2800.3] Safety commissioning mode
Additional diagnostic
information
1 = Faults with response "NONE"
1 = Faults with response "immediate pulse suppression"
1 = Faults with response "immediate pulse suppression"
that cannot be acknowledged
1 = STOP A
To Safe Torque Off
"STOP A initiated"
Diagnostics for STOP F
SI Status P2
r9872
r9872
[2804.5]
.15
SI Status P2
r9872
r9872
[2804.5]
.10
SI Status P2
r9872
r9872
[2804.5]
.9
SI mon_clk cyc P1 [ms]
r9780
Monitoring clock cycleSafety Integrated version
SI CDC_list P1
r9794
SI diag STOP F P1
r9795