User Manual

List of parameters

Parameters

1-491

SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013

Value: 700: Supplementary telegram 700, PZD-0/3

999: Free telegram configuration with BICO

Dependency: Refer to: p0922, p2071, p2079

Note: The clearance to the PZD telegram can be increased using p2071.

After changing p0922/p2079 or p2071, then p60122 must be set again.

The telegram interconnections can only be changed if p60122 and p0922 are both set to 999.

Description: Displays PROFINET Name of Station.

Notice: An ASCII table (excerpt) can be found, for example, in the appendix to the List Manual.

Description: Displays PROFINET IP of Station.

r61000[0...239] PROFINET Name of Station / PN Name of Station

CU240E-2_PN_F

CU240E-2 PN

Access level: 3 Calculated: - Data type: Unsigned8

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- - -