User Manual

Parameters

List of parameters

1-474

SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013

Description: Sets the signal source of input quantity I of instance NOT 4 of the inverter.

Description: Display parameter for the inverted output of instance NOT 4 of the inverter.

Description: Setting parameter for the run-time group in which the instance NOT 4 of the inverter is to be called.

Value: 1: Run-time group 1

2: Run-time group 2

3: Run-time group 3

4: Run-time group 4

5: Run-time group 5

6: Run-time group 6

9999: Do not calculate

Description: Setting parameter for the run sequence of instance NOT 4 within the run-time group set in p20302.

Note: The function blocks with a lower run sequence value are calculated before function blocks with a higher run

sequence value.

Description: Sets the signal source of input quantity I of instance NOT 5 of the inverter.

p20300 BI: NOT 4 input I / NOT 4 input I

Access level: 3 Calculated: - Data type: U32 / Binary

Can be changed: T Scaling: - Dyn. index: -