User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 CU240B/E-2 Control Units List Manual

411

412

413

414

415

416

417

418

419

420

Parameters

List of parameters

1-412

SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013

Value: 0: Statically active

1: F-DI 0

2: F-DI 1

3: F-DI 2

255: Statically inact

Dependency: Refer to: p10106

Refer to: A01666, A30666

Note: The values "static active" and "static inactive" result in an inactive function of the safe acknowledgment.

F-DI: Failsafe Digital Input

Description: Sets the debounce time for digital inputs.

The debounce time is accepted rounded off to whole milliseconds.

The debounce time acts on the following digital inputs:

- Fail-safe digital inputs (F-DI).

- Single-channel digital inputs (DI).

- Single-channel digital input 5 (DI 5, read back input for the forced checking procedure).

Dependency: Refer to: p10117

Note: Example:

Debounce time = 1 ms: Fault pulses of 1 ms are filtered; only pulses longer than 2 ms are processed.

Debounce time = 3 ms: Fault pulses of 3 ms are filtered; only pulses longer than 4 ms are processed.

The debounce result can be read in r10051.

Description: Sets the fail-safe digital input (F-DI) for the "STO" function.

Value: 0: Statically active

1: F-DI 0

2: F-DI 1

3: F-DI 2

255: Statically inact

Dependency: Refer to: p10122

Note: If value = 0:

No terminal assigned, safety function always active.

If value = 255:

No terminal assigned, safety function always inactive.

F-DI: Failsafe Digital Input

STO: Safe Torque Off

p10017 SI digital inputs debounce time (processor 1) / SI DI t_debounceP1

PM240

PM250

PM260

CU240E-2_DP_F

CU240E-2_F

CU240E-2_PN_F

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: C(95) Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

0.00 [ms] 100.00 [ms] 1.00 [ms]

p10022 SI STO input terminal (processor 1) / SI STO F-DI P1