User Manual

ManualsBrandsSiemens ManualsVariable Speed DriveSINAMICS G120 CU240B/E-2 Control Units List Manual

391

392

393

394

395

396

397

398

399

400

Parameters

List of parameters

1-400

SINAMICS G120 CU240B/E-2 Control Units List Manual (LH11), 01/2013

Note: Re index 0:

Displays the parameterized minimum current of p9588.

Re index 1:

Displays the currently measured current of the encoderless actual value sensing

Description: Display to diagnose the angle for sensorless actual value sensing.

Index: [0] = Plausibility angle actual value

[1] = Voltage angle actual value

[2] = Current angle actual value

Dependency: Refer to: p9585

Note: Re index 0:

Displays the actual plausibility angle.

Re index 1:

Displays the actual voltage angle.

Re index 2:

Displays the actual current angle.

Description: Displays the actual velocity deviation for sensorless actual value sensing.

This value is calculated when setting p9585/p9385.

The actual velocity has a deviation of +/- r9787 for 6 ms * p9585/p9385 within a monitoring time of 1 s.

Dependency: Refer to: p9585

Note: For linear axes, the following unit applies: millimeters per minute

For rotary axes, the following unit applies: revolutions per minute

r9786[0...2] SI Motion diagnostics sensorless angle / Diag sl angle

PM240

PM250

PM260

CU240E-2_DP_F

CU240E-2_F

CU240E-2_PN_F

Access level: 3 Calculated: - Data type: FloatingPoint32

Can be changed: - Scaling: - Dyn. index: -

Units group: - Unit selection: - Func. diagram: -

Min Max Factory setting

- [°] - [°] - [°]

r9787 SI Motion diagnostics sensorless velocity deviation / Diag sl v_dev