Manualshelf

Technical data

ManualsBrandsSiemens ManualsConsumer electronicsCU230P-2
23242526272829303132
CU230P-2 Control Units, Getting Started
A5E02484096, 05/2009
31
7.2 Setting the COM interface
Setting the COM interface
You can find, and if required, change the COM interface from the control panel as subsequently described.
In the Device Manager,
under "Ports", you will find
the "SINAMICS G120
Bridge Driver" and after it,
the COM connection
number in brackets. This
must be less than 8.
If not, then you must select
a free number in the range
from 0 to 7 as subsequently
described.