User Manual

SINAMICS G120 CU230P-2 Control Units
List Manual, 04/2018, A5E33838102
607
3 Function diagrams
3.8 Internal control/status words
3.8 Internal control/status words
Function diagrams
2501 – Control word, sequence control (r0898) 608
2503 – Status word, sequence control (r0899) 609
2505 – Control word, setpoint channel (r1198) 610
2510 – Status word 1 (r0052) 611
2511 – Status word 2 (r0053) 612
2512 – Control word 1 (r0054) 613
2513 – Supplementary control word (r0055) 614
2522 – Status word, speed controller (r1407) 615
2526 – Status word, closed-loop control (r0056) 616
2530 – Status word, current control (r1408) 617
2534 – Status word, monitoring functions 1 (r2197) 618
2536 – Status word, monitoring functions 2 (r2198) 619
2537 – Status word, monitoring functions 3 (r2199) 620
2546 – Control word, faults/alarms (r2138) 621
2548 – Status word, faults/alarms 1 and 2 (r2139 and r2135) 622
2610 – Sequence control - Sequencer 623
2634 – Sequence control - missing enable signals, line contactor control 624