User Manual

2 Parameters

2.2 List of parameters

SINAMICS G120 CU230P-2 Control Units

522 List Manual, 04/2018, A5E33838102

For p31022 = 7:

The mean value of actual values 1, 2 and 3 is used as r31027.

For p31022 = 8:

The lower value of actual values 1 and 2 is used as r31027.

For p31022 = 9:

The lowest value of actual values 1, 2, and 3 is used as r31027.

For p31022 = 10:

The higher value of actual values 1 and 2 is used as r31027.

For p31022 = 11:

The highest value of actual values 1, 2, and 3 is used as r31027.

Description: Sets the signal source for the multi-zone control setpoints.

Description: Displays the relevant setpoint at the multi-zone control output.

Description: Sets the signal source for the day/night multi-zone control switchover.

Description: Sets the signal source for the multi-zone control actual values.

Description: Displays the relevant actual value at the multi-zone control output.

p31023[0...3] CI: Multi-zone control setpoint input / Zone_ctrl setp inp

Access level: 2 Calculated: - Data type: U32 / FloatingPoint32

Can be changed: T Scaling: PERCENT Dyn. index: -