User Manual

2 Parameters
2.2 List of parameters
SINAMICS G120 CU230P-2 Control Units
250 List Manual, 04/2018, A5E33838102
Description: Sets the filter time constant for the DC link voltage.
This time constant is used to calculate the modulation depth.
Description: Sets the filter time constant for the DC link voltage.
This time constant is used to calculate the modulation depth.
Description: Displays the effective modulator mode.
Value: 1: Flat top modulation (FLB)
2: Space vector modulation (SVM)
9: Optimized pulse pattern
Description: Displays the effective modulator mode.
Value: 1: Flat top modulation (FLB)
2: Space vector modulation (SVM)
3: Edge modulation from 28 Hz; 23:3
4: Edge modulation from 28 Hz; 19:1
5: Edge modulation from 60 Hz; 17:3
6: Edge modulation from 60 Hz; 17:1
7: Edge modulation from 100 Hz; 9:2
8: Edge modulation from 100 Hz; 9:1
9: Optimized pulse pattern
p1806[0...n] Filter time constant Vdc correction / T_filt Vdc_corr
PM230
PM250, PM260
Access level: 4 Calculated: p0340 = 1,3 Data type: FloatingPoint32
Can be changed: U, T Scaling: - Dyn. index: DDS, p0180
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0.0 [ms] 10000.0 [ms] 0.0 [ms]
p1806[0...n] Filter time constant Vdc correction / T_filt Vdc_corr
PM240
PM330
Access level: 3 Calculated: p0340 = 1,3 Data type: FloatingPoint32
Can be changed: U, T Scaling: - Dyn. index: DDS, p0180
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
0.0 [ms] 10000.0 [ms] 0.0 [ms]
r1809 CO: Modulator mode actual / Modulator mode act
PM230
PM240
PM250, PM260
Access level: 4 Calculated: - Data type: Integer16
Can be changed: - Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
1 9 -
r1809 CO: Modulator mode actual / Modulator mode act
PM330 Access level: 4 Calculated: - Data type: Integer16
Can be changed: - Scaling: - Dyn. index: -
Unit group: - Unit selection: - Func. diagram: -
Min Max Factory setting
1 9 -