User Manual
8. Connect the mains supply and the motor.
0DLQVVXSSO\ 0RWRU
8/
9/
:/
3(
8
9
:
The Power Modules are equipped with removable plug connectors that cannot be
inadvertently interchanged. To remove the connectors, press the red lever to release the
interlock.
9. Fit the front cover of the Power Module.
Make sure that the seal of the front cover is not damaged.
Line supply and motor are connected to the FSA … FSC Power Modules.
❒
Connecting the mains supply and motor, frame sizes FSD … FSF
Procedure
1. Open the door of the Power Module.
2. Remove the terminal cover.
Installing
4.4 Connecting the line supply and motor
Converter with the CU230P-2 Control Units
96 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF