User Manual

Frame
size
Drilling dimensions [mm] Cooling air clearances [mm]
1)
Fixing/torque [Nm]
h b c Top
2)
Bottom
2)
Front
FSF 680 270 13 300 350 100 4 x M8 / 25
FSG 970.5 265 15 300 350 100 4 x M8 / 25
1)
The Power Module is designed for mounting without any lateral cooling air clearance. For tolerance
reasons, we recommend a lateral clearance of approx. 1 mm.
2)
The top and bottom cooling air clearances refer to the Power Module without shield plate
Installing
4.3 Installing Power Modules
Converter with the CU230P-2 Control Units
78 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF