User Manual

Property Data / explanation
Analog inputs 4 (AI 0 … AI 3)
● Differential inputs
● 12-bit resolution
● 13 ms response time
● AI 0 and AI 1 can be switched over:
– 0 V … 10 V or ‑10 V … +10 V (typical power consumption: 0.1 mA,
voltage < 35 V)
– 0 mA … 20 mA (120 Ω input resistance, voltage < 10 V,
current < 80 mA)
● If AI 0 and AI 1 are configured as supplementary digital inputs: Voltage
< 35 V, low < 1.6 V, high > 4.0 V, 13 ms ± 1 ms response time for
debounce time p0724 = 0.
● AI 2 switchable:
– 0 mA … 20 mA (voltage < 10 V, current < 80 mA)
– Temperature sensor Pt1000/LG-Ni1000/DIN-Ni1000
(characteristics: See below)
● AI 3:
Temperature sensor Pt1000/LG-Ni1000/DIN-Ni1000 (characteristics:
See below)
Digital outputs /relay out‐
puts
3 (DO 0 … DO 2)
● DO 0, DO 2: 30 VDC 5 A / 250 VAC, 2 A
1)
● DO 1: 30 VDC 0.5 A
● 2 ms update time
Analog outputs 2 (AO 0 … AO 1)
● 0 V … 10 V or 0 mA … 20 mA
● Reference potential: "GND"
● 16-bit resolution
● 4 ms update time
Temperature sensor PTC
● Short-circuit monitoring < 20 Ω
● Overtemperature 1650 Ω
KTY84
● Short-circuit monitoring < 50 Ω
● Wire-break: > 2120 Ω
Pt1000
● Short-circuit monitoring < 603 Ω
● Wire-break > 2120 Ω
Temperature switch with NC contact
USB interface Mini-B
Dimensions (W × H × D) 73 mm × 199 mm
× 50 mm
Depth when mounting on the Power Module
Memory card (optional) Slot for SD or MMC memory cards.
Memory cards (Page 380)
Weight 0.61 kg
Technical data
10.1 Technical data for CU230P-2
Converter with the CU230P-2 Control Units
442 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF