User Manual

Procedure
1. In the project, select "Parameter".
2. Select "Units".




3. Select the system of units.
4. Select the technological unit of the technology controller.
5. Save your settings.
6. Go online.
The inverter signals that offline, other units and process variables are set than in the inverter
itself.
7. Accept these settings in the inverter.
You have selected the motor standard and system of units.
❒
Advanced commissioning
6.14 Physical units
Converter with the CU230P-2 Control Units
258 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF