User Manual

5.6 Restoring the factory setting
Why restore the factory setting?
Reset the inverter to the factory settings in the following cases:
● You do not know the inverter settings.
● The line voltage was interrupted during commissioning and you were not able to complete
commissioning.
Restore the factory inverter settings
Procedure with Startdrive





1. Go online.
2. Select "Commissioning".
3. Select "Backing up/reset".
4. Select "All parameters are reset".
5. Press the "Start" button.
6. Wait until the inverter has been reset to the factory setting.
You have reset the inverter to the factory settings.
❒
Procedure with the BOP-2 operator panel
1. In the "Options" menu, select the "DRVRESET" entry
2. Confirm the reset using the OK key.
3. Wait until the inverter has been reset to the factory setting.
You have reset the inverter to the factory settings.
❒
Commissioning
5.6 Restoring the factory setting
Converter with the CU230P-2 Control Units
Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF 193