User Manual

5.5 Quick commissioning with a PC
The screen forms that are shown in this manual show generally valid examples. The number
of setting options available in screen forms depends on the particular inverter type.
Overview
To be able to perform quick commissioning using a PC, you need to do the following:
1. Creating a project
2. Integrating the inverter into the project
3. Go online and start the quick commissioning
5.5.1 Creating a project
Creating a new project
Procedure
1. Start the Startdrive commissioning software.
2. In the menu, select "Project" → "New…".
3. Specify a name of your choice for the project.
You have created a new project.
❒
5.5.2 Transfer inverters connected via USB into the project
Integrating the inverter into the project
Procedure
1. Switch on the inverter power supply.
2. First insert a USB cable into your PC and then into the inverter.
3. The PC operating system installs the USB driver when you are connecting the inverter and
PC together for the first time.
Commissioning
5.5 Quick commissioning with a PC
Converter with the CU230P-2 Control Units
180 Operating Instructions, 04/2018, FW V4.7 SP10, A5E34257946B AF