User Manual

Communication via PROFIBUS and PROFINET
3.6 Communication via PROFINET
Fieldbuses
64 Function Manual, 04/2018, FW V4.7 SP10, A5E34229197B AE
Configuring communication with Startdrive
Proceed as follows to make the settings for communication with the control system.
● Activate the following windows in Startdrive: "View/Project tree" and "View/Inspector
window".
● Open the drive in the project tree and double click on "Device configuration".
This opens the dialog in the inspector window for setting the PROFINET interface.
● Click on "Ethernet addresses".
● Enter the appropriate values.
You have configured communication with the control system.
❒
You can enter or read out data directly via the parameter view. To do this, select the
"Communication" parameter group and the "Show advanced parameters" option.