User's Manual

38
Base station settings
Gigaset C450 IP / GBR PTT / A31008-M1713-L151-1-7619 / settings_bs_hs_pabx.fm / 15.5.06
Version 4, 16.09.2005
Base station settings
The base station settings are carried out
using a registered Gigaset C46 handset.
Changing the system PIN
You have to enter the system PIN when
registering a handset to the base station.
You can change the base station's 4-digit
default system PIN ("0000") to a 4-digit
PIN known only to yourself.
§Menu§ ¢ Settings ¢ Base ¢ System PIN
~ Enter current system PIN and
press
§OK§.
~ Enter your new system PIN
and press
§OK§.
For security reasons, "
****
" is displayed
instead of the system PIN.
a Press and hold (idle status).
Restoring the base station to
factory settings
When the settings are restored all hand-
sets are de-registered. The individual set-
tings are reset. Only the date and time are
retained.
§Menu§ ¢ Settings ¢ Base ¢ Base Reset
§OK§ Press the display key to
confirm.
Activating/deactivating repeater
mode
With a repeater you can increase the
range and reception strength of your base
station. You have to activate the repeater
mode for this. This will terminate any calls
being made via the base station at that
time.
Precondition: a repeater is registered.
§Menu§ ¢ Settings ¢ Base ¢ Additional
Features
¢ Repeater Mode
Select and press
§OK§ (‰ =on).
Setting up an emergency
number
Emergency numbers are automatically
dialled via the fixed network. You can set
up your own emergency number.
§Menu§ ¢ Settings ¢ Base ¢ Additional
Features
¢ Additional Emergency No.
~ Enter the system PIN and press
§OK§.
If an emergency number is already saved,
this will be displayed.
~ Enter emergency number and
press
§OK§.
Set default connection
You can make settings according to
whether you want to make calls via VoIP or
fixed network by default.
§Menu§ ¢ Settings ¢ Base ¢ Default Line
Type
IP / fixed line
Select and press
§OK§ (‰ =on).
When making calls:
¤ Briefly press the talk key c if you want
to make a call via this default connec-
tion.
¤ Press and hold the talk key c if you
want to make a call via the other con-
nection type.