User's Manual

36
Handset settings
Gigaset C450 IP / GBR PTT / A31008-M1713-L151-1-7619 / settings_bs_hs_pabx.fm / 15.5.06
Version 4, 16.09.2005
Changing ringtones
u Volume:
Five volume levels (1–5; e.g. Volume 2
= ˆ) and "crescendo" ring ‰. With
"crescendo" ring, the volume gets
louder with every ring.
u Melody:
List of pre-loaded ringtone melodies.
The first three melodies are the "classi-
cal" ringtones.
You can also set different melodies for the
following functions:
u External Calls: for external calls
u Internal Calls: for internal calls
u Alarm Clock: for the alarm clock
Setting the ringtone volume
The ringtone volume is the same for all
types of ring.
§Menu§ ¢ Audio Settings ¢ Ringer Volume
Or in idle status:
t Press briefly.
Then:
q Adjust the volume and press
§OK§.
a Press and hold (idle status).
Setting ringtone melody
Set different ringtone melodies for exter-
nal calls, internal calls and the alarm clock.
§Menu§ ¢ Audio Settings ¢ Ringer Melody
External Calls / Internal Calls / Alarm Clock
Select and press
§OK§.
q Select melody (‰ =on) and
press
§OK§.
a Press and hold (idle status).
Activating/deactivating the ringtone
You can turn off the ringtone on your
handset before you take a call or while the
phone is in idle status.You can take a call
as long as it is displayed on the screen.
Deactivating the ringtone
P Press the star key and hold,
until the Ú icon appears in the
display.
Re-activating the ringtone
P Press and hold the star key in
idle status.
Activating/deactivating muting
of the first ringtone
The phone identifies an incoming SMS
from the first network signal.
§Menu§ 4IO1O
~1§OK§ First ringtone muted.
Or:
~Q§OK§ First ringtone audible.
Please note:
If first ringtone muting is deactivated,
then every incoming SMS will be signalled
by a ringtone. If you take this type of "call"
at the first ringtone, you will lose the SMS.
Advisory tones
Your handset uses ‘advisory tones’ to tell
you about different activities and sta-
tuses. You can activate or deactivate the
following tones: