User's Manual

32
Using several handsets
Gigaset C450 IP / GBR PTT / A31008-M1713-L151-1-7619 / T-NetBox_SAG-registration.fm / 15.5.06
Version 4, 16.09.2005
Using several handsets
Registering handsets
You can register up to six handsets to your
base station.
Registering another Gigaset C46
handset
Before you can use your handset, you
must register it to a base station.
You must initiate handset registration on
the handset and on the base station.
If the handset has been registered suc-
cessfully you will see the display key
§INT§ at
the bottom left of the display. Otherwise
repeat the procedure.
On the handset
Menu§ ¢ Settings ¢ Handset ¢ Register
Handset
~ Enter the system PIN of the
base station (the default is
0000) and press
§OK§. The dis-
play shows e.g. Registering and
Base is flashing.
On the base station
÷ Within 60 secs. press and hold
the registration/paging key on
the base station (page 1)
(min. 1 sec.).
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤ Start to register the handset as
described in its user guide.
On the base station
÷ Press and hold the registra-
tion/paging key on the base
station (page 1) (min. 1 sec.).
De-registering handsets
You can de-register any registered C46
handset from any registered handset.
§INT§ Press the display key. All regis-
tered handsets are displayed.
q Select the handset to be de-
registered.
§Menu§ Press the display key.
De-register Handset
Select and press
§OK§.
~ Enter the base station system
PIN (default setting: 0000).
§OK§ Press the display key to con-
firm the prompt.
a Press and hold (idle status).
The handset is de-registered immediately,
even if it is not in idle status.
Please note:
– If there are several handsets registered to
your base station, you can use one to make
a call via the fixed network and the other to
make a call via the Internet at the same
time.
– As a rule, all calls from a registered GAP
handset are dialled via the connection type
(fixed network or VoIP, see page 38) that
has been set up as Default Line Type. If you
want to establish a connection via the other
connection type, enter a "*" (star) after the
phone number. Example: 1234567*.
Please note:
If six handsets are already registered to the
base station, there are two options:
– The handset with the internal number 6 is
in idle status: the handset you wish to reg-
ister is assigned the number 6. The handset
that was previously number 6 is de-regis-
tered.
– The handset with the internal number 6 is
being used: the handset you wish to regis-
ter cannot be registered.