User's Manual

Siemens PLT 111 · 1999
6/6
Bus communication
Connecting cables
Connecting cables for 20-m local bus
To connect the interface modules for 20-m local bus to one
another and to the bus converter UI. A front plug is required for
the last participant on the local bus when using the cable
6DS8 201-8.. .
Ordering data Order No.
Summary of connecting cables with description: see page 3/34.
Connecting cable for 20-m local
bus
between two interface modules
for 20-m local bus, 1 plug
6DS8 201-8
0.3 m MB 1.5 m EC 10 m AD
0.5 m SB 5.0 m SC 15 m ED
0.63 m UB
Front plug 6DS9 200-8AA
Connecting cable for 20-m local
bus
between two interface modules
for 20-m local bus and bus con-
verter UI, 2 plugs
6DS8 205-8
0.3 m MB 1.5 m EC 5 m SC
0.5 m SB
Connecting cable for 20-m local
bus
between interface modules for
20-m local bus and bus convert-
ers UI1 and UI2, 3 plugs
6DS8 204-8
0.3 m MB 2.0 m HC 2.7 m LC
1.2 m CC 2.2 m JC 5.0 m SC
1.5 m EC 2.5 m KC
Connecting cable for 20-m local
bus
between interface modules for
20-m local bus N-AS and bus con-
verters UI1 and UI2 as well as
connection distributor for 20-m
local bus, 4 plugs
6DS9 201-8CA
Connecting cable for 20-m local
bus
between interface module for
20-m local bus N-AS and bus con-
verters UI1 and UI2 as well as
connection distributor for 20-m
local bus, 5 plugs
6DS9 201-8FC
Connecting cables for remote bus
The following two remote bus cables are
recommended:
Ordering data Order No.
Remote bus cable
Standard remote bus cable
Specify length in plain text
(max. 4 km)
V45466-D21-B35
1)
Length ..... m
1) Order from
ICP CC VCE
Kistlerhofstr. 170
D-81379 Munich
Tel.[phone]
Fax [phone]
Inhouse remote bus cable
Specify length in plain text
(max. 2 km)
2)
2) When mixed with the standard remote bus cable, the total length of the
two cables must not exceed 4 km.
V45466-D17-B135
1)
Length ..... m
This catalog is out of date, see note on page 1