User's Manual

Siemens PLT 111 · 1999
4/7
I/O modules
Signal modules
Binary input and output modules
Binary input and output modules
The following modules are available:
• Binary input module with 48 inputs, non-floating, with
interrupt control,
6DS1 601-8BA
To input 48 binary signals DC 24 V (non-floating) to the central
unit of an automation system, optionally with interrupt control.
With binary inputs with interrupt on AS 235 systems, the mod-
ule can be used as a common alarm module for subordinate
binary input modules 6DS1 601-8BA or 6DS1 602-8BA.
The common alarm module can be used with 1-out-of-2 or
1-out-of-3 redundancy in the AS 235 H system.
• Binary input module with 32 inputs, floating, with interrupt
control,
6DS1 602-8BA
To input 32 binary signals DC 24 V (floating) with an external
reference potential or highly affected by interference to the
central unit of an automation system, optionally with interrupt
control. Interrupt acquisition is carried out as a slave module
with common alarm.
• Binary input module, testable,
6DS1 618-8CA
To input 48 binary signals DC 24 V (floating) to the central unit
of an AS 235 or AS 235 H automation system, optionally with
common alarm. The driver PBE can carry out a function test.
• Binary output module with 32 outputs, 100 mA each, non-
floating,
6DS1 603-8RR
To output 32 binary signals (non-floating) via output drivers
with a loading capacity of 100 mA or 400 mA.
• Binary output module with 16 relays,
6DS1 605-8BA
To switch high-power loads up to 60 VA and to transfer signals
to other systems via floating contacts. One changeover contact
is available at each of the 16 relay outputs (common point,
NC contact and NO contact). Each of the lines to the common
points is fused (on the front panel).
• Relay output module, testable
6DS1 606-8BA
To output 16 fused binary signals via floating, monitored con-
tacts up to DC 60 W. One changeover contact is available at
each of the 16 relay outputs. The driver PBA carries out com-
prehensive monitoring functions in the AS 235 and AS 235 H
systems.
Ordering data Order No.
Binary input module
• With 48 inputs, non-floating, with
interrupt control
1)
– Module
2)
1) If this module is used as a common interrupt module, only 1 x per
AS 235 system (insert in I/O slot 61),
max. 3 x per AS 235 H in slots 12, 28 and 44.
2) Instruction Manual not available separately but as part of the manual
"Signal modules" C79000-G8000-C31 (German) or C79000-G8076-
C31 (English).
6DS1 601-8BA
• With 48 inputs, floating, with
interrupt control
– Module
2)
6DS1 602-8BA
• With 48 inputs, non-floating, with
common alarm, testable
– Module
– German Instruction Manual
– English Instruction Manual
6DS1 618-8CA
C79000-B8000-C131
C79000-B8076-C131
Binary output module
• With 32 outputs, 100 mA each,
non-floating
– Module
2)
6DS1 603-8RR
• With 16 relays
– Module
2)
6DS1 605-8BA
• Relay output module, with 16
outputs, testable
– Module
– German Instruction Manual
– English Instruction Manual
6DS1 606-8BA
C79000-B8000-C160
C79000-B8076-C160
This catalog is out of date, see note on page 1