User's Manual
Siemens PLT 111 · 1999
1/6
TELEPERM M
System data
Introduction
Technical data of automation systems (continued)
I/O modules
Function modules/calculation mod-
ules
Autonomous closed-loop and
individual control drive modules
or user-configured with own
microprocessor
Signal modules
Binary and analog
Counter modules
Metered pulse module, pro-
portioning counter module
Coupling modules
For SIMATIC S5/S7 peripheral
I/O modules and devices, and
for subordinate devices and sys-
tems
Max. number of I/O modules
90 / 114
1)
(AS 235)
91 / 103
1)
(AS 235 H)
6 / 108
1)
(AS 235 K)
1) When used with ES 100 K extension system
Typical quantity breakdown
Control loops 30 to 80
Additional analog-value monitoring
50 to 120
Sequential controls
5 to 15
Logic controls
100 to 250
Any number of flowcharts (up to 8
colors) and individually formatted
logs
Dimensions / weight
Dimensions (
H x W x D
) in mm
• Standard cabinets
– With degree of protection IP 20
– With degree of protection IP 20
and IP 54
• Housing with degree of protection
IP 21
2200 x 900 x 400
2200 x 900 x 600
820 x 600 x 360
Weight
•AS 235 / AS 235 H
•AS 235 K (DC)
AS 235 K (AC)
200 to 250 kg
2)
77 kg
3)
85 kg
3)
2) Typical value, depends on configuration with I/O modules
3) Without I/O modules
This catalog is out of date, see note on page 1