User's Manual

Siemens PLT 111 ยท 1999
2/8
System architecture
Standard function blocks
Configuring
Driver blocks for configurable TELEPERM ME I/O modules
Driver blocks for I/O modules with standardized display
Type Designation Function For modules with
Order No.
MSB
Motor/valve and actuator
control
Acquisition and transfer of binary signals to the binary generation module
6DS1 717-8AA/-8RR
+ 6DS1 719-8AA/-8RR
TVB Preselection and subloop
control
Acquisition and transfer of binary signals to the binary calculation module for
operation and monitoring of a preselection or subloop control
6DS1 717-8AA/-8RR
BRBK Organization and binary
input/output block
Acquisition of binary signals from the flag area of the binary calculation module,
coordination together with ABR, MSB or TVB
6DS1 717-8AA/-8RR
ABR Analog input and output Acquisition and transfer of analog signals to the analog extension module via
the binary calculation module
6DS1 717-8AA/-8RR
+ 6DS1 720-8AA
REN Analog/binary inputs and
output
Acquisition and transfer of analog and binary signals of the analog calculation
module
6DS1 715-8BB
RSK
RSKB
Closed-loop control mod-
ule driver
Operation block for RSK
block
Acquisition of signals from single-channel and two-channel configurable
closed-loop control modules
For operation and monitoring of configurable closed-loop control modules,
together with RSK block
6DS1 408-8BB
6DS1 410-8BB
6DS1 411-8AA/-8RR
6DS1 412-8AA/-8RR
Type Designation Function For modules with
Order No.
RE
RK
Closed-loop controller,
single-channel
Acquisition of signals from single-channel closed-loop control modules;
transfer of commands and standardized increments to the closed-loop control
modules
As RE, with additional functions
6DS1 400-8BA
(S controller)
6DS1 401-8BA
(K controller)
EM
EU
Individual control drive,
motor
Acquisition of signals from individual control drive modules and application of
signals to the binary outputs, e.g. for a subgroup control; transfer of commands
to the individual control drive modules
As EM, with additional functions
6DS1 500-8BA
6DS1 502-8BA
EV
EK
Individual control drive,
valve
As EM, for the corresponding modules
As EV, with additional functions
6DS1 501-8BA/-8BB
6DS1 503-8BA
DZ Proportioning counter Acquisition of signals from proportioning counter modules (2/4 channels);
connection of these signals to the block outputs;
transfer of commands and standardized analog values
6DS1 613-8BB
EG Individual control drives
(4 to 8 channels)
Acquisition of signals from modules;
connection of these signals to the binary outputs;
transfer of commands
6DS1 504-8AA
6DS1 505-8AA
FM Field multiplexer Acquisition of signals from a channel of the interface module for FM 100 field
multiplexer
1)
; transfer of signals to the module
6DS1 304-8AA
6DS1 304-8BB
1) No longer available
This catalog is out of date, see note on page 1