Operating instructions en CI24WP..
Contents Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety and warning information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Information concerning disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Congratulations Safety and warning information Important information when using the appliance – Before you switch ON the appliance Never use electrical appliances inside the appliance (e. g. heater, electric ice maker, etc.). Explosion hazard! – Please read the operating and installation instructions carefully. They contain important information on how to install, use and maintain the appliance. Keep all documentation for subsequent use or for the next owner.
Children in the household – Do not allow children to play with the appliance! – If the appliance features a lock, keep the key out of the reach of children. General requirements The appliance is designed to hold and control the temperature of drinks, in particular wines. The appliance is designed for domestic use. The appliance is suppressed according to EU Directive 89/336/EEC. The refrigerant circuit has been tested for leaks.
Your new appliance These operating instructions refer to several models. Illustrations can differ. A Upper temperature zone B Lower temperature zone 1. 2. 3. 4. Fascia Lighting for the upper temperature zone Presentation attachment * for full effect presentation of wine bottles Division wall for dividing up the different temperature zones 5. 6. 7. 8.
Fascia A On/Off button Serves to switch the appliance on and off. B Alarm button switches the alarm sound off. See section “Door alarm” (page 8). C Display panel The temperature is displayed on the fascia. Activated special functions are shown via “symbol”. The menus and setting options which are available are represented on the fascia in the setup mode. See section “Setup mode” (page 9). D Selection button The temperature setting is activated using the selection buttons .
Fixing Installation Installation location Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to direct sunlight nor near a heat source, e.g. a cooker, radiator, etc. If installation next to a heat source is unavoidable, use a suitable insulating plate or observe the following minimum distances to a heat source: – 3 cm to an electric cooker. – 30 cm to an oil or solid-fuel cooker. The floor on which the appliance is to be installed must be rigid.
Factory settings Upon leaving the factory, the appliance has been supplied with the following settings: – Fascia language: English – Temperature unit: °C – Refrigerator compartment temperature +11 °C Note The factory settings (language, temperature unit) can be changed in the setup mode. Selecting the temperature The temperatures in both compartments can be set independently of each other from +5 °C to +18 °C. We recommend a setting of +11 °C.
Variable interior design Setup Mode Pull outs There are menus for adapting the appliance to the individual user requirements. These adaptions are carried out in the setup mode. Individual adjustments LED presentation light To activate the setup mode: l Press setup button . The pull outs can be easily pulled out and pushed in. l The first menu (temperature unit) is displayed in the fascia. To take out the pull outs, lift slightly and take out.
Menus in the setup mode Menu Setting options Displayed text Temperature unit °C (degrees Celsius) °F (degrees Fahrenheit) ° ° Language German English French Danish Finnish Greek Dutch Italian Polish Portuguese Norwegian Russian Swedish Spanish Turkish Czech "! " ! !" " # !" & Sound On / Off / ! Energy saving mode (eco function) On / Off / Humidity (upper temperature zone) On / Off / Humidity (l
l Press the selection button , until and the current setting ( ) is displayed. Sabbatical mode Sabbatical mode settings: The symbol display field. – the accoustic signal is switched off when the button is actuated (if activated); – The interior illumination is switched off; the background illumination of the fascia is switched off. is shown in the The humidity function ends: l Press the + or – setting button, in order to reset the setting.
Storage examples The following images represent storage examples for commercially available 0.75 l Bordeaux bottles. 45.7 cm appliance 61.0 cm appliance 70 bottles 98 bottles Practical tips for storing wine Drinking temperatures – Always unpack bottles of wine – do not store in crates or boxes. – Place old bottles so that the cork is always wet. There should never be an air gap between the wine and the cork.
Operating noises Normal operating noises Humming – refrigerating unit is running. The fan in the circulating air system is running. Bubbling, gurgling or whirring noises — refrigerant is flowing through the tubing. Clicking — motor is switching on or off. Noises which can be easily rectified Thawing the appliance Press the on/off button and switch the appliance off! l l Take all food out of the appliance. Cleaning the appliance l Clean all packing units located in the appliance.
Sensor failure Appliance self-test Before you call customer service, conduct a self-test on the appliance. l Switch off the appliance and wait 5 minutes. Keep the door closed during this time. l Switching on the appliance. l At the same time, press the setup and the alarm button button for 5 seconds. Cause A technical defect on the appliance is possible. Remedial action Conduct a self-test on the appliance. Low voltage Cause The mains voltage falls below the permitted limiting value.
Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice, even if the appliance is still under guarantee! Fault Possible cause: Remedial action Appliance has no refrigerating capacity. Interior light does not function. The display does not illuminate. Power failure; the fuse has been switched off; the mains plug has not been inserted properly.
LED presentation light A new LED can be obtained from customer service. Exchange the odour filter Spare filters are available from your dealer. Customer service Check whether you can remedy the fault yourself on the basis of information provided in the “Eliminating minor faults yourself" section (page 15). Your local customer service can be found in the telephone directory or in the customerservice index. Please provide customer service with the appliance product number (E-Nr.) and production number (FD).
=
=
=
Subject to alterations. Siemens Elektrogeräte GmbH Carl-Wery-Straße 34 81739 München www.siemens-hausgeraete.
