Installation guide

Maintenance and service

Siemens Building Technologies

Fire Safety & Security Products 09.2008

6 Maintenance and service

The following maintenance guidelines should be observed.

Cleaning Use only soap and water to clean the housing and pane - no abrasive solvents. Additional protection

can be applied to the pane to reduce contamination and droplet formation from moisture or rain.

Products from the automotive or cleaning industry which use nanotechnology to reduce surface

energies and thus contamination and moisture build-up can be used for this purpose.

6 monthly checks 1. All fastenings and cables should be checked for tightness and wear.

2. Regular checks should be performed to ensure that the outer sheaths of the cables are not

damaged and that the cables are not fouling on any obstruction.

NOTE

This installation guide cannot cover all conceivable cases of installation, operation or maintenance.

Should you require further information or should special problems occur which are not discussed in

adequate detail in the installation guide, please request the required information from your local

Siemens office.

We must also point out that the contents of this installation guide do not constitute a part of an earlier

or existing agreement. Neither do they constitute or amend any earlier or existing commitment or legal

relationship. All obligations on the part of Siemens result from the relevant purchase agreement which

also contains the complete and solely valid warranty regulations. This installation guide neither

extends nor restricts these contractual warranty regulations.

7 Disposal

All electrical and electronic products should be disposed of separately from the

municipal waste stream via designated collection facilities appointed by the

government or the local authorities.

This crossed-out wheeled bin symbol on the product means the product is covered by

the European Directive 2002/96/EC.

The correct disposal and separate collection of your old appliance will help prevent

potential negative consequences for the environment and human health. It is a

precondition for reuse and recycling of used electrical and electronic equipment. For

more detailed information about disposal of your old appliance, please contact your

city office, waste disposal service or the shop where you purchased the product.