Technical data

Configuration
System
9
61
Siemens AG
A6V10334028
20.12.2011
z Network Camera Reboot - When you click on "Reboot" the following message
will pop up: "This will reboot the camera. Are you sure?". Click "OK" to reboot
the network camera.
9.10.4 Temperature
There are options for displaying the temperature: Celsius and Fahrenheit. The
current internal temperature of the camera is displayed. If the temperature exceeds
the limit value, an e-mail will be sent depending on the temperature notification
interval setting. If “0” is selected, the e-mail will be delivered only once.
When the temperature of the camera is too high, for example above 70°C，a
warning message will pop up.
9.10.5 Test
The status of the system can be displayed here.