Technical data

Configuration
Image parameter
9
39
Siemens AG
A6V10334028
20.12.2011
1. Mark the appropriate "Enable" checkbox and enter a name, then click “Set
Cropping Area” to start cropping setting.
2. A cropping setting screen will pop up as shown. Select one of the cropping
options (QVGA, CIF, QCIF, Free Size) at the bottom of the screen. A red-mesh
rectangle will appear on the screen.
3. Select one of the predefined sizes.
D The zone appears at the screen.
4. Move the zone by clicking the left mouse button in the center of the target
position.
D The red mesh will jump to that position.
5. Click “OK” to save and finish the settings.
6. Click “Save” to save your settings.
Select free size
1. Click on one corner of the window and drag it to the desired size
2. Click “OK” to save and finish the settings.