User's Manual

Configuration
35
Siemens Building Technologies
Fire Safety & Security Products 01.2009
NOTE
A speaker with amplifier inside shall be connected to AUDIO out jack on rear panel.
7.4.2 Motion detection settings
The setting is similar to alarm input with some additional functions:
z Motion detection
– Set on, open motion detection function.
– Default is off, close motion detection function.
z Area
– Click “Set motion area”, an image screen will pop up.
– Select the interested area by dragging the mouse.
z Sensitivity
Set "Sensitivity."
– High: An alarm will be triggered with even small changes in brightness within
the defined area.
– Mid: Intermediate between High and Low.
– Low: An alarm will be triggered with a major change in brightness within the
defined area.
z Text Enable
– Select ON or OFF to define whether an additional alarm text defined in the
Text field is to be overlaid on the video image.
z Text
– Define an individual text for alarm overlay.
z Audio Output
– Select ON or OFF to define whether an additional audio message (*.wav),
pre-recorded on the SD card, is to be output via the Audio out connector.
z Event
Pre-recorded voice files with extension .wav that have been uploaded to SD
memory card in advance can be selected as voice alarm message. Max. 4 kinds
of audio source can be selected.