User Manual

EPD - Type II
Based on ISO 14021
PXC5.Exxx System Controller
CFG3.F100 Controller
Product line, product ran
ge
Siemens Schweiz AG
Building Technologies Division
Theilerstrasse 1a
CH-6300 Zug
Management System since by
ISO 9001 (Quality) 22.07.1986 SQS
ISO 14001 (Environment) 20.10.1998 SQS
OHSAS 18001 (OH&S) 01.01.2011 SQS
Typical energy consumption 87kWh/a
Maintenance
Fire protection according to
Fire load 8MJ
20-PAP Corrugated fibreboard Folded bottom box 46g
22-PAP Paper Packaging label 1g
Notes on disposal
Total weight of device 351g
The total wei
g
ht of a device ma
y
deviate from the total of the wei
g
hts of all individual com
p
onents due to roundin
g
.
PC Upper housing section 72g
PC Battery cover 11g
PBT+PP Siemens label 1g
PC Button short 1g
PC Light guide 1g
PC Lower housing section 71g
PC Slider (3 pieces) 6g
Steel stainless Wire spring (3 pieces) 1g
PA/CuZn/Fe Terminal block 2 pole (3 pieces) 12g
PA/CuZn/Fe Terminal block 3 pole (3 pieces) 17g
FR4; TBBA; solder SnAgCu Main-Board PCBA 116g
FR4; TBBA; solder SnAgCu User-Interface PCBA 26g
FR4; TBBA; solder SnAgCu Connection PCB 2g
FR4; TBBA; solder SnAgCu Capricorn PCBA 17g
Others
PCBAs (Printed Circuit Board
assembled)
Materials
Packaging
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes
the environmental impact of its products with respect to production, procurement, sales, use, services and disposal
during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Product use
Plastics
Risk of fire
Typenschild: 19VA
Product
DESIGO
One-way, recyclable
Environmental
Product Declaration
Type of equipment /
Product No.
Change of batteries
Only when customer want's to use the feature to backup the RTC
fth7d
EN60730; UL916
Page 1/2