User Manual

OPC Object Specifications_2
Siemens
Building Technologies
ID Object Model
Description
FS20EN-0350
FS20EN Zone
OPC Item PresentValue
OPC Item Mode Result State
0-Disable
1-Enable
9-Fast
8-Slow
2-Test
285-Walktest
14-Normal
0-Quiet 1-Normal Normal
X X X X X
267-Non Default Mode 0-Disabled Disabled
X X X X X X
267-Non Default Mode 9-Fast Fast
X X X X X
267-Non Default Mode 8-Slow Slow
X X X X X
267-Non Default Mode 2-Test Test
X X X X X
267-Non Default Mode 285-Walktest Walktest
X X X X X
16-Abnormal 260-Off Temporary Off Temporary
X X X X X X
1-Pre Alarm 1-Normal Pre Alarm
X X X
2-Alarm 1-Normal Alarm
X X X
6-Not Ready 1-Normal Not Ready
X X X X X
16-Abnormal 1-Normal Abnormal
X X X X X
The Zone handles the raw alarm information coming from one or more detectors. Different
zones (Automatic, Technical, Gas, Multi, Extinguishing, etc.) can be used depending on
purpose.
States
Commands on OPC Item Mode
OPC DA Specifications_V3.0_FS20EN.xlsx Page 37 of 45