OPC Interface Specifications Version 5.1 XLS Document No.
Siemens Smart Infrastructure XLS Fire Panel This workbook describes the objects provided by the Siemens OPC Data Access Server to represent the XLS fire control unit Legend ID Object Model Description
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0010 XNET Audio Zone Submodule Modules providing amplifier circuits. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate 0-Quiet 1-Normal 3-Fault 1-Normal Normal X X X X Fault X X X 267-Non Default Mode 12-Disabled X Disabled X X X OPC DA Specifications_V5.1_XLS.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0020 XNET Ckt Device Output circuit driven by system behavior. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate 0-Quiet 1-Normal 3-Fault 1-Normal Normal X X X X Fault X X X 267-Non Default Mode 12-Disabled X Disabled X X X X OPC DA Specifications_V5.1_XLS.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0030 XNET Control Submodule Module to send live pages to specific speaker. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 5 of 53
Siemens Smart Infrastructure OPC Object Specifications ID XNET-0040 Object Model Description XNET Conventional Module Module that allows conventional smoke detectors to be used with the FireFinder XLS system. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 3-Fault 1-Normal Normal X X Fault X 267-Non Default Mode 12-Disabled X Disabled X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 6 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0050 XNET Conventional Zone Component Component that allows conventional smoke detectors to be used with the FireFinder XLS system. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 3-Fault 1-Normal Normal X X Fault X 267-Non Default Mode 12-Disabled X Disabled X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 7 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0060 XNET Conventional Zone Device Device capable of supporting Siemens compatible conventional smoke detectors. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X X States \ \ Commands on OPC Item Conventi
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0070 XNET DAC Module Digita audio card to control voice-system modules. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 9 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0080 XNET Default Device Input/output devices used for speaker, telephone line, municipal tie, leased line, and so on. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X X States \ \ Commands on OPC Item LE
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0080 cont. States Commands on OPC Item Switch1.Present Value OPC Item Switch1.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item Relay1.Present Value OPC Item Relay1.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0090 XNET Default Module Input/output control modules used for strobe, horn and notification appliance. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 3-Fault 1-Normal Normal X X Fault X 267-Non Default Mode 12-Disabled X Disabled X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 12 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0100 XNET Default Submodule Submodules for input/output supervision, especially for voice and audio applications. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 13 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0110 XNET Detector Component Smoke and fire components. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 14 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0120 XNET Detector Device Smoke and fire detectors. Part I States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X X States \ \ Commands on OPC Item AudBaseAlert.Present Value OPC Item AudBaseAlert.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0120 States Part I cont. Commands on OPC Item AudBaseEvac.Present Value OPC Item AudBaseEvac.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate Normal X X X X Alarm X X X X 515-Fault Fault X X X X 267-Non Default Mode Disabled X X X X 268-Trouble Bypass Enabled X X X X States Commands on OPC Item AudBaseOther.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0120 XNET Detector Device Smoke and fire detectors. Part II States Commands on OPC Item Ambient.Present Value OPC Item Ambient.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item CO.Present Value OPC Item CO.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0120 Part II cont. States Commands on OPC Item MultiCrit.Present Value OPC Item MultiCrit.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item Neural.Present Value OPC Item Neural.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0120 XNET Detector Device Smoke and fire detectors. Part III States Commands on OPC Item Relay1.Present Value OPC Item Relay1.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0120 Part III cont. States Commands on OPC Item SmokePhoto.Present Value OPC Item SmokePhoto.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item Thermal.Present Value OPC Item Thermal.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0130 XNET DLC Device loop card. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 21 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0140 XNET HCP Output Device Intelligent control point, capable of switching on and supporting a notification appliance circuit, telephone, or speaker zone that is remotely located near a detector loop.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0150 XNET HTRI Device Addressable interface module. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 23 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0160 XNET HTRI Relay Device Addressable interface module with relay output. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X X X Alarm X X X 3-Fault X 1-Normal Fault X X X 267-Non Default Mode X 12-Disabled Disabled X X X X OPC DA Specifications_V5.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0170 XNET HUB-4 Module Module for Enclosure connection. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 25 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0180 XNET HUB-4 Device Modem or RS-485 Port for Enclosure connection. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 26 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0190 XNET LED Component LED Component. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal Normal X 2-Alarm 1-Normal Alarm X 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ \ X X OPC DA Specifications_V5.1_XLS.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0200 XNET LED Device Indicator LED. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X States \ \ Commands on OPC Item LED.Present Value OPC Item LED.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0210 XNET Manual Station Device Manual pull station. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Alarm X 3-Fault X 1-Normal Fault X 267-Non Default Mode X 12-Disabled Disabled X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 29 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0220 XNET Network Interface Module Module that provides solid-state relay outputs at locations that are remote from a node's central enclosure States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 30 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0230 XNET OCM-16 Module Module that provides solid-state relay outputs at locations that are remote from a node's central enclosure States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State \ \ 0-Quiet 1-Normal Normal X X 3-Fault 1-Normal Fault X X 267-Non Default Mode 12-Disabled Disabled X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 31 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0240 XNET Panel XLS panel node. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Connect 5 - Disconnect 0 - Quiet 1-Normal 2 - Alarm 1-Normal Normal X X Not Reachable X 3 - Fault X 1-Normal Security X 267-Non Default Mode X 12-Disabled Disconnected X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 32 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0250 XNET PMI Module Control panel module. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 2-Alarm 1-Normal Alarm 3-Fault 1-Normal Fault 267-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 33 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0260 XNET Port Device Parallel and serial ports. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 2-Alarm 1-Normal Alarm 3-Fault 1-Normal Fault \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 34 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0270 XNET Power Module Primary and extender power supply. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X Fault X 267-Non Default Mode 1-Normal X Security X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 35 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0280 XNET Power Supply Submodule Primary and extender power supply submodules. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 6 - Activate 7 - Deactivate 0-Quiet 1-Normal 3-Fault 1-Normal Normal X X Fault X X OPC DA Specifications_V5.1_XLS.xlsx \ \ Page 36 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0290 XNET Printer Module Remote printer module which processes one parallel port and two serials ports. States Commands on OPC Item Mode OPC Item Mode OPC Item PresentValue Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 37 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0300 XNET Pseudo Device Non-existing device used for logic function purposes only. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 2-Alarm 1-Normal Alarm 3-Fault 1-Normal Fault 22-Supervisory 1-Normal Supervisory 267-Non Default Mode 1-Normal Security 268-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0310 XNET Pseudo Module Non-existing module used for logic function purposes only. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 1-Normal Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 39 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0320 XNET Relay Component Programmable relay component. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X X X Alarm X X X 3-Fault X 1-Normal Fault X X X 267-Non Default Mode X 1-Normal Disabled X X X OPC DA Specifications_V5.1_XLS.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0330 XNET Relay Output Device Programmable relay element. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 4 - Enable 5 - Disable 6 - Activate 7 - Deactivate 0-Quiet 1-Normal 2-Alarm 1-Normal Normal X X X X Alarm X X X 3-Fault X 1-Normal Fault X X X 267-Non Default Mode X 1-Normal Disabled X X X X States Commands on OPC Item Relay1.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0340 XNET SCM Non-existing module used for logic function purposes only. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 3-Fault 1-Normal Fault 267-Non Default Mode 1-Normal Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 42 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0350 XNET Switch Component Component for supervision which makes the element addressable to a FireFinder XLS node.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0360 XNET Switch Input Device Module for input supervision which makes the element addressable to a FireFinder XLS node.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0370 XNET Switch Input Device No License Module for input supervision which makes the element addressable to a FireFinder XLS node.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0380 XNET Unidentified Unidentified event object. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 2-Alarm 1-Normal Alarm 3-Fault 1-Normal Fault 22-Supervisory 1-Normal Supervisory 267-Non Default Mode 1-Normal Security 268-Non Default Mode 12-Disabled Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 46 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0390 XNET VESDA Component VESDA components used for smoke detection with continuous air sampling. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 2-Alarm 1-Normal Alarm 3-Fault 1-Normal Fault 22-Supervisory 1-Normal Supervisory 267-Non Default Mode 1-Normal Disabled \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 47 of 53
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0400 XNET VESDA Device VESDA devices used for smoke detection with continuous air sampling.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0410 Part I cont. States Commands on OPC Item Alert.Present Value OPC Item Alert.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item Fire1.Present Value OPC Item Fire1.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0410 Part I cont. States Commands on OPC Item Fire1.Present Value OPC Item Fire2.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item Fire1.Present Value OPC Item Scan.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0420 XNET VESDA Device VESDA devices used for smoke detection with continuous air sampling. Part II States Commands on OPC Item Fire2.Present Value OPC Item Fire2.PresentValue Result State 512-Quiet 514-Alarm 4 - Enable 5 - Disable Normal X X Alarm X X 515-Fault Fault X X 267-Non Default Mode Disabled X X 268-Trouble Bypass Enabled X X States \ \ Commands on OPC Item Scan.
Siemens Smart Infrastructure OPC Object Specifications ID Object Model Description XNET-0430 XNET VPM VESDA peripheral module. States Commands on OPC Item Mode OPC Item PresentValue OPC Item Mode Result State 0-Quiet 1-Normal Normal 2-Alarm 1-Normal Alarm 3-Fault 1-Normal Fault \ OPC DA Specifications_V5.1_XLS.xlsx \ \ \ Page 52 of 53
Siemens Smart Infrastructure Siemens Industry Inc. Building Technologies Division 1000 Deerfield Pkwy Buffalo Grove IL 60089 Tel. +1 847-215-1000 © Siemens Industry Inc. 2021 Technical specifications and availability subject to change without notice.
