User Manual

OPC Object Specifications
Siemens
Building Technologies
ID Object Model
Description
SPC-0070
SPC System
OPC Item PresentValue
OPC Item Mode
Result State
\ \ \ \
0-Normal
1-Normal
Normal
3-Fault
1-Normal
Fault
267-Non Default Mode
260-Inhibit
Inhibited
267-Non Default Mode
0-Isolate
Isolated
8-Tamper
1-Normal
Tamper
Commands on OPC Item Mode
Intrusion System - General conditions related to the SPC intrusion system.
States
OPC DA Specifications_V3.0_SPC.xlsx Page 9 of 15