Technical data

57
Siemens Building Technologies
Fire Safety & Security Products 08.2006
12.2 Advanced camera functions
The 6000 series and v3i controllers also provide direct access to advanced camera
functions:
Lens slow
This function slows down the operation of the lens's Zoom and Focus functions to
make it easier to control when fine adjustments are necessary. The function
toggles on and off.
Lamps
If set to Manual in the camera special menu, this function toggles between the
camera's day and night setting.
Autofocus
The Autofocus function can be toggled on and off. The manual focus keys can still
be used when autofocus is latched on, but the Solaris™ Dome will start to
autofocus again after a pan, tilt or zoom operation.
Auto Iris
When the EXP priority is set to Keyboard, the Iris can be manually controlled using
the Iris Open and Iris Close keys on the keyboard, or switched to Automatic Iris by
pressing the Auto Iris key.
Function 6000 series
v3i
Lens Slow
Lamps
Enter the camera function control and select the
relevant v3i option to navigate the menus.
Autofocus
Auto Iris
12.3 Use with Siemens controllers
The Siemens CCDA protocol is implemented and may be selected from the
protocol menu. Controlling the dome using the CCDA protocol can be performed
by direct connected keyboard CKA48xx/CKA32xx, SIMATRIX Neo (Port 1) and
SIMATRIX SYS / 648 / 164 by using the dome converter CAC0103, Release V1.7
(Aug. 06).