Technical data

42
Siemens Building Technologies
Fire Safety & Security Products 08.2006
10.4 XTU setup
Using the main XTU menu you can configure the XTU to the correct settings for
your control equipment:
1. Select the correct telemetry protocol. See Section 12: Telemetry controller
operation and setup.
MAIN XTU MENU >> PROTOCOL
2. Select the control interface type.
MAIN XTU MENU >> INTERFACE
3. Select the receiver address (camera number).
MAIN XTU MENU >> RECEIVER ADR
4. Press the
button to view if the video signal is present.
5. Press the
button to exit ‘live video’ mode.