Technical data

25
Siemens Building Technologies
Fire Safety & Security Products 08.2006
6. Lock the Dome bracket into position by back-tightening the locknut and
locking it against the face of the Dome bracket. Hand tight will be sufficient.
8.5 Cat5 cable assembly and disassembly
Solaris™ is supplied with a 10 m preassembled Cat 5 cable. In some cases, it may
be necessary to change the cable (for a shorter cable or to replace a damaged
cable, for example). It is very important that the cable assembly is assembled /
disassembled in the following manner, to ensure a watertight seal between the
connector and the Dome unit.
IMPORTANT
The Solaris™ Dome will not be fully water protected if these vital checks are
not made prior to finalising the installation.
1 Label
2 Seal 2
3 Seal 1
4 Connector
5 Spring-clip