User's Manual

Functions
4.8 Optimizing a Cam
CamTool
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
4-29
Field/button Explanation/instructions
Jerk (v > 0)
Min The minimum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is undershot, the minimum value is displayed with a
red background.
Max The maximum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is exceeded, the maximum value is displayed with a
red background.
Jerk (v < 0)
Min The minimum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is undershot, the minimum value is displayed with a
red background.
Max The maximum value is displayed here as absolute value and as
percentage value depending on the physical limit.
If the physical limit is exceeded, the maximum value is displayed with a
red background.
Notice
For the slave axis, you can take over the settings of an axis already existing in the project via
the menu Cam > Simulation settings and specify the limits of the axis. These simulation
settings for the slave axis are used for the calculation of the percentage values which are
displayed in the Limits tab.