User's Manual

Functions
4.7 Interpolation point
CamTool
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
4-21
The interpolation point is displayed in the diagram. The position of the interpolation point
is shown in the tooltip.
Figure 4-16 Insert interpolation point
Notice
Once the function Cam > Insert > Interpolation point is activated, you can insert
interpolation points in the S diagram (distance diagram) until
• you press the ESC key,
• you press the right mouse button (this activates the selection tool in the toolbar) or
• you activate another cam segment (fixed point, straight line, sine curve, arc sine curve) for
insertion.
4.7.3 Changing the interpolation point position
Requirements
The cam is opened with SIMOTION CamTool.