User's Manual

Functions
4.6 Arc Sine Curve
CamTool
4-16 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
The current position of the arc sine curve is shown in the tooltip.
Figure 4-11 Insert arc sine curve
Notice
Once the function Cam > Insert > Arc sine is activated, you can insert arc sine curves in
the S diagram (distance diagram) until
• you press the ESC key,
• you press the right mouse button (this activates the selection tool in the toolbar) or
• you activate another cam segment (fixed point, straight line, sine curve, interpolation point) for
insertion.