User's Manual

Functions
4.5 Sine curve
CamTool
4-12 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
The current position of the sine curve is shown in the tooltip.
Figure 4-6 Insert sine curve
Notice
Once the function Cam > Insert > Sine is activated, you can insert sine curves in the S
diagram (distance diagram) until
• you press the ESC key,
• you press the right mouse button (this activates the selection tool in the toolbar) or
• you activate another cam segment (fixed point, straight line, arc sine curve, interpolation point)
for insertion.