User's Manual

Functions
4.3 Fixed point
CamTool
4-4 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
The fixed point is displayed in the diagram. The position of the fixed point shown in the
tooltip.
Figure 4-2 Insert fixed point
Notice
Once the function Cam > Insert > Fixed point is activated, you can insert fixed points in
the S diagram (distance diagram) until
• you press the ESC key,
• you press the right mouse button (this activates the selection tool in the toolbar) or
• you activate another cam segment (straight line, sine curve, arc sine curve, interpolation point)
for insertion.