User's Manual

Configuring
3.5 Customize the display of the cam
CamTool
3-22 Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
Field/button Explanation/instructions
Auxiliary line spacing
(Main line spacing activated)
If the main line spacing option has been activated, you can
also activate the display of the grid lines for the auxiliary line
spacing.
If you deactivate the Set automatically option, you can
specify the grid line spacing for the auxiliary line spacing.
Note:
The spacing that you specify for the grid lines in the main
line spacing must be a multiple of the spacing that you
specify for the grid lines in the auxiliary line spacing.
3.5.5 Change lines and fonts representation parameters
For the representation of the diagrams, default parameters are used for the lines and fonts.
You can change these default settings.
/LQHIRUFDPVHJPHQWV
,QWHUSRODWLRQFXUYHLQWKHGLVWDQFHGLDJUDP
/LQHIRUVLPXODWHGLQWHUSRODWLRQ
<FRRUGLQDWHD[LV
$X[LOLDU\JULGOLQHV
0DLQJULGOLQH
9HORFLW\FXUYH
;FRRUGLQDWHD[LV
$X[LOLDU\OLQH
$FFHOHUDWLRQFXUYH
$X[LOLDU\OLQH
-HUNFXUYH
/LQHDWSK\VLFDOOLPLW
Figure 3-16 Representation parameters in the diagrams (line for the scaling not shown)