User's Manual

Configuring
3.5 Customize the display of the cam
CamTool
Configuration Manual, 12.2004, 6AU1900-1AB32-0BA0
3-19
Field/button Explanation/instructions
Representation range
Start
(Number of periods deactivated)
Specify here the Start point of the representation range.
If the Number of periods option has been activated, the
system will determine the start point.
End
(Number of periods deactivated)
Specify here the End point of the representation range.
If the Number of periods option has been activated, the
system will determine the end point.
Number of periods
(cyclical absolute,
cyclical relative)
If under Target device parameters in the Coordinates tab,
you have specified the cyclic absolute execution type or the
cyclic relative execution type, you can select the
option Number of periods. Enter the number of periods that
you want to display.
Grid lines
Set automatically If you activate Set automatically, the grid lines will be
displayed automatically with an optimum spacing.
If you deactivate Set automatically, you can use Main line
spacing or Auxiliary line spacing to specify the grid line
spacing.
Main line spacing You can activate the display of the grid lines for the main
line spacing here.
If you deactivate the Set automatically option, you can
specify the grid line spacing for the main line spacing.
Note:
The spacing that you specify for the grid lines in the main
line spacing must be a multiple of the spacing that you
specify for the grid lines in the auxiliary line spacing.
Auxiliary line spacing
(Main line spacing activated)
If the main line spacing option has been activated, you can
also activate the display of the grid lines for the auxiliary line
spacing.
If you deactivate the Set automatically option, you can
specify the grid line spacing for the auxiliary line spacing.
Note:
The spacing that you specify for the grid lines in the main
line spacing must be a multiple of the spacing that you
specify for the grid lines in the auxiliary line spacing.